Before you start,
Download and extract driver in a folder.
Note: The process will install two device drivers so be patient.
- Place the disc provided into your CD driver or extract downloaded driver.
- Plug the Mini B USB connecter into Ensyc RFID Block.
- Your PC or Laptop should be on and logged in.
- Plug the other end of the cable into a USB slot on your PC.
-
Your PC will identify the new hardware and you will see a screen similar to this:
-
- Answer 'No, not this time' and press Next.
-
Select 'Install AUtomatically' if you have a CD of driver or 'Install from a specific location' if you have downloaded driver from Ensyc website.
-
-
You may be asked to identify the location of the files to install. If so, point to the directory where the driver is located.
-
-
During the installation you will be warned that the software is not cerfified, please click 'Continue Anyway'
-
- After installation of the driver select "Finish' to complete this part.
- The system will prompt you again to install the USB Serial Port.
- Select the same responses as in the previous installation.
-
After both drivers are installed you can check in under Device Manager and you will find two new hardware listed.
-
